CryoHome Spa S2 with Chiller C2
CryoHome Spa S2 with Chiller C2 - Image 2
CryoHome Spa S2 with Chiller C2 - Image 3
CryoHome Spa S2 with Chiller C2 - Image 4
CryoHome Spa S2 with Chiller C2 - Image 5
CryoHome Spa S2 with Chiller C2 - Image 6
CryoHome Spa S2 with Chiller C2 - Image 7
CryoHome Spa S2 with Chiller C2 - Image 8
CryoHome Spa S2 with Chiller C2 - Image 9
CryoHome Spa S2 with Chiller C2 - Image 10
CryoHome Spa S2 with Chiller C2 - Image 11
CryoHome Spa S2 with Chiller C2 - Image 12

CryoHome Spa S2 with Chiller C2

£13,140

Shipping and VAT included for UK and Ireland excluding Highlands and Islands *

Our handcrafted Red Cedar clad CryoHome S2 ice bath is a beautiful addition to any home or hotel. It is suitable for one or two people at a time and can be enjoyed indoors or outdoors (see chiller choices). It comes with a two year warranty, operates at temperatures down to 3°C, cools quickly and allows for complete body immersion in the cold water.

The S2 comes complete with state of the art 50 sq ft (5 sq m) skim filtration system to ensure compliance with EU & UK HSG282 pool sanitisation regulations.

Matching weatherproof matching Cedar housing is available as an option for the chiller – see full options below.

The CryoHome S2 ice bath package is supplied complete with:

  1. Chiller C2
  2. Skim filtration with cartridge filters
  3. Optional wooden cover
  4. Hoses, drain and connections
  5. Start up kit
  6. Manual
Technical Specification of Spa
Dimensions LxWxH: c. 1.55 x 0.79 x 0.75 m

Capacity: c. 350 litres

Weight empty: c. 150 kg

Weight full: c. 500 kg

Power: 230 v / 1 / 50 hz

Filter: Integrated skim filter

Technical Specification of Chiller C2
  • Suitable up to 800 litres
  • Lowest temperature: 3 °C
  • Chilling capacity: 2.9 kW
  • Weight: 37 kg
  • Dimensions (L x W x H): 0.55 x 0.40 x 0.49m
  • Noise level: c. 59 dB
  • Cooling Rate (450 litres): 4° to 5°C per hour (subject to ambient temperature)
  • Self-priming pump
  • Dry run protection
  • Carry handle
  • Transport wheels

OPTIONAL EXTRAS:

  • Dual temperature: Heating up to 40°C
  • Weatherproof cabinet (essential for outdoor use): Dimensions (L x W x H) 0.45 x 0.79 x 0.75m

Available on back-order

* For enquiries outside the UK and Ireland, please contact us.

What to consider before purchasing

Where to place the ice bath
The ice bath can be placed on any solid ground floor. The floor should be tiled or have a vinyl floor covering i.e. should be suitable as a wet area. The ice bath can also be placed on the first floor providing it can bear the load of an ice bath plus bathers plus water.

Our Ice baths can also be placed outside providing the chiller is designed for outdoor use or is protected from adverse weather conditions. Please see individual chiller specifications. Adequate space should be left to access the ice bath.

Steps should be taken to avoid the bath freezing in the winter.

Where to place the chiller
Ideally, the chiller needs to be placed near to the to the ice bath, preferably no more than 5 metres away. Speak to us if you have any questions in this respect. The chillers will needs ventilation space of around 50cm to the front and side which aids helps air circulation and helps to ensure optimum performance.
Access to the site
Gravel pathways or grass can make it diffcult to wheel the units on a pallet truck or dolly and may require the ice bath to be carried across these areas. Our Ice Baths typically fit through a standard doorway but older buildings may have narrower doors and tight corners or corridors. Contact us for advice if you are unsure.
Health & Safety
The unit needs to be maintained on a daily/weekly basis with the filters being cleaned every 2/3 days (depending on usage). The filters should last 9 months before they need changing.

The selection of UV or Ozone sanitisation will reduce the requirement for chemicals. If chlorine is used we recommend 1ppm as per the test strip.  Empty the bath before the water deteriorates, ideally every 2 to 4 weeks depending on usage and user hygiene.

Be aware of contraindications before using ice baths. Seek medical advice if you have any doubt or suffer from cardiac conditions for example.

Ambient temperature
Ideally, the room temperature that the chiller operates in should be no higher than 30°C. The warmer it is the less efficient the chiller and therefore more energy will be required to maintain the water temperature.
Aeration
Please ensure that the chiller has 50cm of airflow to the front and side grill. Chiller efficiency will be reduced if it operates in a dirty or dusty environment.
Water and drain
The ice bath does not require a permanent water supply; simply fill with a flexible hose.

The ice bath can be emptied via gravity to floor level a drain in the proximity of the bath. If you don’t have a floor level drain you may have to use a submersible pump to empty the spa. We can advise you on this if you are unsure.

Power
The CryoHome Ice Baths have no power requirement. The chillers will plug into a standard RCD protected socket.